Lou Kren Lou Kren
Senior Editor

Open Technology and Digital Manufacturing

November 1, 2021


The recently wrapped RAPID + TCT offered the opportunity to get back out and see the people and technology that propel additive manufacturing (AM). Developments continue unabated, with some of these detailed in 3D Metal Printing’s show-recap article in this issue. But two terms stood out for me and for others I’m sure, as they were mentioned constantly at the show: “open” and “digital manufacturing.” Why, and what connects these terms?

Established metal-part-manufacturing processes such as machining, casting and stamping take part material from a large list of metal and alloy providers and stick the material into machines provided from a large list of equipment providers. In general, the equipment cares not from where the material came, and in the end, as long as the material meets certain specs, and given like tooling, any similarly designed equipment regardless of where it’s from will yield an acceptable part. Contrast this with metal AM. Often the material must be a direct match for a particular machine and model, from a particular manufacturer. Often the production and quality-control software must have been developed for that particular machine and manufacturer. And, machines and material must be qualified for use in safety- and mission-critical applications such as aerospace and medical—the specific material and even a specific machine.

Of course, metal AM is an incredibly complicated process where so much occurs at microscopic levels. With laser powder-bed fusion, for example, millions of tiny welds must occur across thousands of layers as a machine builds a part. Few other part-production processes even come close to such levels of sophistication. 

But, suppose that software and Industry 4.0 technology could learn to operate and monitor AM processes, record and analyze data, and fine-tune the process on machines from different suppliers, with materials usable in various makes of machines. AM researchers and technology providers envision such an environment, and plenty of pledges to “open” technology to enable this environment were forwarded at RAPID + TCT. In fact, many technology platforms already are open. Besides daunting technical challenges, standards must evolve while sticky IP issues must be navigated, but progress on this front continues.  

The opening of technology to allow more flexibility leads to the holy grail of metal AM: scaling of production to volume. That’s where “digital manufacturing” comes in. Already, software platforms can remotely link AM machines, ultimately harnessing the power of banks of machines that can deliver monthly volumes in the thousands to meet global demand. Imagine hundreds of machines from various manufacturers working in concert to accept material and process it to deliver tens or hundreds of thousands of quality parts monthly. 

“With digital manufacturing,” summarizes a 2020 article from TheManufacturer.com, “manufacturers can create a factory that is a connected, networked and fully integrated environment, enabling them to use real-time data analytics to optimize the entire manufacturing process and realize productivity gains of 10 to more than 1000 percent. Those extra zeros aren’t typos.”

The possibilities are staggering. Creation of these smart factories and smart-factory networks is what will place metal AM on the mantle alongside the established part-manufacturing processes. At RAPID + TCT, we heard plenty about suppliers and parts makers partnering to develop digital manufacturing and make it work—not 5, 10 or 20 years from now, but in a matter of months. And, 3DMP will be detailing the efforts and results.

Industry-Related Terms: Additive manufacturing
View Glossary of 3D Metal Printing Terms

Technologies: Management

Comments

Must be logged in to post a comment.
There are no comments posted.

Subscribe to the Newsletter

Start receiving newsletters.